1. Product Composition:

It is composed of amino resin, alkyd resin, pigment and filler, solvent and additives.

II. Product Features:

The film is fine, hard quickly, good grinding, strong adhesion, good rust-proof performance, easy to combine with the top paint.

III. Product Applications:

It is suitable for the surface and base decoration of security doors and iron products.

IV. Product Categories:

Alkyd amino drying primer, epoxy amino drying primer

V. Technical Indicators:

VI. Supporting Paints:

The backside amino drying topcoat.

7. Construction steps:

Step 1: substrate treatment

1. For ironware with oil stains, use cotton cloth dipped in a specialized thinner for amino paint to remove the oil from the surface.

2. The rusted base material must be polished and removed with professional tools such as wire brushes, sandpaper, or sanding machines until the new base material is exposed.

3. For uneven surfaces, apply a thin primer coat, allow it to dry completely, then fill the gaps with putty. Once dry, sand the surface smooth with a sandpaper.

4. Finally, wipe the substrate with a clean cotton cloth to remove any rust or dust, ensuring it is oil-free, rust-free, dust-free, and flat.

Smooth the surface to ensure the primer adheres properly.

Step 2: Primer application

Spray application: Open the container and mix thoroughly before pouring into a container. Add 30-40% amino paint-specific diluent for dilution. After mixing, filter through a 120-mesh sieve. Adjust the air pump to 3-5 bar pressure.

Apply the amino primer uniformly in a sequence of from inside to outside and from top to bottom.

Step 3: Surface paint application

1. After the primer dries, you can apply the amino magnetic paint.

2. After the primer dries, lightly sand it with sandpaper before applying the amino magnetic paint.

Step 4: Baking Process

After the construction is completed, the object to be coated should be left at room temperature for 30 minutes (to allow some solvent to evaporate), then placed in a constant temperature oven at 120°C for 30 minutes before removal. Note: When the temperature is 20°C, place it in a clean indoor area for 40 minutes until the surface dries.

8. Precautions:

1. The construction site must maintain proper ventilation and be equipped with fire prevention facilities.

2. During construction, the coated items must avoid contact with water, oil, acidic or alkaline substances.

3. After construction, clean spray guns, brushes and other tools with a dedicated diluent for amino paint.

4. Do not pour leftover paint back into the original bucket; instead, store it in a cool, dry place.

9. Storage, Transportation, and Shelf Life:

1. The product should be stored in a well-ventilated and dry place, and should be protected from direct sunlight. In summer, appropriate cooling measures should be taken when the temperature is too high.

2. During transportation, protect the product from rain and direct sunlight.

3. The product has a shelf life of 12 months. During storage, the packaging must remain unopened and comply with storage conditions. After the expiration date, the product may be handled according to the product standards.

If the incoming inspection results meet quality standards, the product may still be used.

10. Safety and Environmental Protection Guidelines:

1. This product is flammable. Ensure proper ventilation and take necessary protective measures during application.

2. If the skin is stained with paint, wash it immediately with soap or other cleaning agents and plenty of water.

3. The disposal of waste paint and packaging materials must comply with local environmental regulations.